Mr. Clog Plumbing
Tapware Installation Sydney: Taps, Mixers & Shower Sets
New kitchen mixer, basin taps, a shower set or a bath spout? We install tapware you've chosen, or supply it, including Methven, Phoenix, Grohe, Mizu, Posh and Franke.
No surprise bills: $0 call-out and a fixed price before any work starts.
Our guarantee: 12 months on our workmanship, in writing. What it covers
About This Service
Most tapware swaps are straightforward: the old tap comes off, the new one goes on with new connectors, and we check for leaks. Some aren't, and it's worth knowing which before you buy. A benchtop mixer needs the right hole in the bench or basin. Swapping two separate taps for a single mixer changes the holes and the connections. And in-wall shower and bath mixers have a body inside the wall made for their own brand's trims, so a new trim from a different brand usually means changing the body, which means opening the wall. We install kitchen mixers, basin mixers and taps, shower sets, rails and mixers, bath spouts and laundry taps, using tapware you've bought or supplied through Reece. You get a fixed price before we start, and 12 months on our workmanship.
What’s Included
- Kitchen mixers and sink taps
- Basin mixers and taps
- Shower sets, rails and mixers
- Bath spouts and bath mixers
- Laundry and wall-mounted taps
- New connectors and isolation valves where needed
- Your tapware, or supplied through Reece
- Fixed price quoted before we start
Fixed price quoted before we start. $0 call-out fee.
Ready to book?
(02) 9139 8945 — available 24/7Swapping Tapware: What Fits Where
Benchtop mixers
Kitchen and basin mixers sit in a hole in the bench, sink or basin. Check the new mixer suits the hole size and the bench thickness.
Two taps to one mixer
Replacing separate hot and cold taps with a mixer means a different number of holes. On a sink or basin with two holes, there are ways to cover the spare; in a wall, it may mean changing what's inside.
In-wall shower and bath mixers
The body inside the wall is made for its own brand's trims. Changing to a different brand usually means changing the body, which needs the wall opened, so it's best done in a renovation.
Wall-mounted taps and spouts
Wall taps and bath spouts need the outlets in the wall to be in the right place and at the right depth for the new tapware.
Before You Buy
Check the water rating
Tapware sold in Australia carries a WELS water rating. More stars means less water used.
Think about spare parts
Mixers from established brands are easier to get cartridges and parts for when they eventually wear.
Check what's under the sink
Pull-out mixers, filter taps and boiling water taps need room under the sink for hoses and units.
Ask us first if you're unsure
Send us a photo of the existing tap and the one you want. It's easier to check before it's bought.
Brands We Install
Tapware
Methven, Phoenix, Grohe, Mizu and Posh tapware, and Franke sinks and taps.
Your own choice
We also install tapware you've bought yourself.
Supplied through Reece
Our parts and fittings come from Reece, and we can supply your tapware through them too.
How It Works
Our Process
Check the fit
Tap holes, mounting, connections, and what's inside the wall.
Fixed price
We quote the install, and any extra fittings it needs.
Install
Old tapware removed, new tapware fitted with new connectors.
Test
Water on, hot and cold checked, every joint checked for leaks.
Related Pages
Common Questions
FAQs
Can you install taps I've bought myself?
Yes. We install tapware you've bought, or supply it through Reece.
Can you swap my two taps for a mixer?
Usually, yes, on a sink or basin. In a wall, it depends on what's inside the wall. We'll check before you buy.
Will a new shower mixer fit my existing wall?
If it's the same brand and range, often. A different brand usually needs a new body in the wall, which means opening it up.
What brands do you install?
Methven, Phoenix, Grohe, Mizu, Posh and Franke, among others, and tapware you've chosen yourself.
Should the flexible hoses be replaced too?
When we install a new mixer, it comes with new connectors. Old flexible hoses under the sink are worth replacing at the same time.
How much does tapware installation cost?
We give you a fixed price before we start, with a $0 call-out fee. For kitchens, see our Kitchen Mixer Upgrade offer.
What Sydney Customers Say
We recently used Mr Clog Plumbing for our granny flat in Guildford and couldn't be happier with the service. Everything was handled professionally from start to finish, with great communication and workmanship…
Absolute legend. Turned up on time, sorted the problem quickly and didn’t charge a fortune. Super easy to deal with and cleaned up after the job too. Will definitely be using him again and would happily recomme…
Turned up on time and honest service, couldn’t ask for much more.
Get a Quote for Tapware Installation
Prefer not to call? Send a few details and we’ll come back to you with an upfront fixed price.
Ready to Book?
Call now for fast, reliable service — $0 call-out fee, available 24/7.