Mr. Clog Plumbing

Gas Fitter Sydney: Cooktops, Gas Leaks & Appliance Connections

Gas installations, gas testing, gas leak repairs, and gas cooktop and appliance connections by licensed gas fitters, with a compliance certificate for the work.

No surprise bills: $0 call-out and a fixed price before any work starts.

Our guarantee: 12 months on our workmanship, in writing. What it covers

Gas work must be carried out by a licensed gas fitter β€” it's the law in NSW. Mr. Clog's licensed gas plumbers install, repair, and service all types of gas appliances and pipework across Sydney. That covers gas installations, gas testing, gas fitting and gas leak repairs, and connecting gas cooktops, ovens and gas hot water. We also carry out gas leak detection and safety inspections. This page covers what a cooktop replacement involves, what to do if you smell gas, and why the paperwork matters.

  • All gas fitters fully licensed under NSW law
  • Gas cooktop replacement and connection
  • Gas leak detection, gas testing and repairs
  • New gas appliance connections
  • Gas line repairs and extensions
  • Certificates of compliance provided

Fixed price quoted before we start. $0 call-out fee.

A cracked glass top, burners that won't light properly, or a kitchen update. Swapping a gas cooktop is one of the most common gas jobs we do, and it has to be done by a licensed gas fitter.

We isolate the gas, disconnect the old cooktop and lift it out. We can take the old one away so you aren't left with it.

You don't have to buy the cooktop through us. If you've already picked one out, we install the one you supply. Check that it suits your gas type (natural gas or LPG) and fits the existing benchtop cut-out before it is delivered.

We connect the new cooktop to the gas supply, test the connection for leaks, and light every burner to check it is working properly before we leave.

We look at the existing gas fitting and isolation valve under the cooktop. If they are in good condition they stay; we only replace them when they need it.

Many gas cooktops have electric ignition and plug into a power point under the bench. If there isn't one, it is a job for a licensed electrician.

Gas leaks are a safety issue before they are a plumbing one. Do these in order, and only what you can do safely.

Don't light anything, and don't turn lights, appliances or power points on or off. A switch can spark.

If you can reach the gas meter on your way out, turn the valve a quarter turn so the lever sits across the pipe. If the smell is strong, don't stop to do it.

Leave the doors open on the way out if you can, and keep everyone away from the house.

For natural gas in Sydney, call Jemena's faults and emergencies line on 131 909. If you use bottled LPG, call your gas supplier. If anyone is unwell or you think there is immediate danger, call 000.

Once it is safe, the leak has to be found and repaired by a licensed gas fitter before the gas goes back on.

Not every gas smell is a big leak, but every one needs checking. A licensed gas fitter can test the system and find where it is coming from.

A smell of gas (the rotten egg odour that is added to gas so leaks can be noticed), a hissing sound near a gas line or appliance, dead plants over a buried gas line, or a gas bill that has jumped for no obvious reason.

We test the gas installation for leaks, then track down the source: a fitting, a connection behind an appliance, or the pipework itself.

We repair or replace the faulty fitting, connection or section of pipe, then test again to confirm the system is sound before the gas is back in use.

New gas cooktops and ovens connected, on their own or as part of a kitchen renovation, where we can do the sink, dishwasher and water lines at the same time.

Gas storage and continuous flow (instantaneous) hot water systems connected when a unit is replaced or installed. Continuous flow units need a gas supply that can handle them.

Gas pipework run through the frame and connected where a new granny flat has gas appliances, as part of the full granny flat plumbing.

Gas installations and extensions to existing gas lines, for a new appliance in a new spot.

Gas fitting in NSW must be done by a licensed gas fitter. That includes connecting or disconnecting a gas appliance, even a straight swap of a cooktop. Unlicensed gas work is illegal and dangerous.

Every connection we make is tested for leaks, and the appliance is run to check it is working properly.

When the job is done, we provide a certificate of compliance. Keep it with your house records: it shows the work was done by a licensed gas fitter.

From the Job Sheet

Greystanes Β·

The problem

The glass on the old gas cooktop was cracked.

What we did

We removed the old cooktop and took it away, installed the new cooktop the customer supplied, and tested the gas connection for leaks. The existing gas fitting and isolation valve were in good condition, so they didn't need replacing.

Old black glass gas cooktop with cracked glass, before replacement
Close-up of the cracked glass on the old gas cooktop
New five-burner gas cooktop installed with all burners lit
Top view of the new gas cooktop with the burners lit after testing

How It Works

01

If you smell gas, get everyone outside first and call the gas emergency line from outside (for natural gas in Sydney, Jemena on 131 909, or 000). Then call us to find and repair the leak.

02

We inspect your gas system, appliances, and pipework to identify any faults or requirements.

03

We provide a clear upfront quote. No work starts without your approval.

04

We complete the work to Australian standards, test it for leaks, and provide a compliance certificate.

Common Questions

The smell of gas (rotten egg odour), hissing sounds near gas lines or appliances, dead vegetation over gas lines, or higher-than-normal gas bills.

Don't light anything or touch light switches or appliances. If it is safe on your way out, turn the gas off at the meter. Get everyone outside and call from outside: for natural gas in Sydney, Jemena's faults and emergencies line is 131 909; for LPG, call your gas supplier; in immediate danger, call 000. Then call a licensed gas fitter to find and repair the leak.

No β€” in NSW, gas appliance connections must be done by a licensed gas fitter. Unlicensed work is illegal and dangerous.

Yes. We install customer-supplied cooktops. Check it suits your gas type and the existing benchtop cut-out before it arrives. We disconnect and remove the old one, connect the new one, and test the gas connection for leaks.

Yes, we can remove the old cooktop and take it away as part of the job.

Not always. We check the existing gas fitting and isolation valve when we replace a cooktop. If they are in good condition, they stay as they are.

Yes. Our licensed gas fitters connect gas storage and continuous flow hot water systems when they are installed or replaced.

Yes β€” we're licensed for both natural gas and LPG systems.

from 38 Google reviews
Read them on Google β†’
Mr Clog did a fantastic job! The pipe excavation work was completed quickly, efficiently and professionally, with everything handled smoothly. The price was very fair and the service was excellent from start to…
Daniel & Stacey W.Kogarah Β· November 2026
Can’t rate this business high enough. I had a very concerning toilet blockage and they came straight out and found and rectified the problem immediately. The price was very reasonable and they went above and be…
Donna Y.Penrith Β· October 2026
Can definitely recommend the team at Mr Clog. A professional service which is quick, great priced and goes the extra mile. The boys were quick to identify my issue, explained the available options including the…
Archie C.Mascot Β· October 2026

See all reviews

Prefer not to call? Send a few details and we’ll come back to you with an upfront fixed price.

How urgent is it?

In a hurry? Call (02) 9139 8945 β€” we answer 24/7.

Call now for fast, reliable service β€” $0 call-out fee, available 24/7.

Call (02) 9139 8945Text